All courses

The Display Screen Equipment (DSE) Awareness course is designed to provide learners with the knowledge and understanding required to work safely and comfortably with computers and other screen-based equipment. It is suitable for anyone who regularly uses display screen equipment as part of their role.

This course focuses on the health risks associated with prolonged DSE use, including musculoskeletal disorders, eye strain and fatigue. Learners will develop an understanding of how to correctly set up their workstation, adopt good posture and take regular breaks to reduce the risk of injury.

Throughout the training, emphasis is placed on ergonomic best practice, risk assessment and personal responsibility. Learners will also gain an understanding of relevant health and safety legislation, including the Display Screen Equipment Regulations.

On successful completion, learners will be able to set up and use their workstation  effectively, helping to improve comfort, reduce strain and promote long-term wellbeing in the workplace.

‍

Theory Multiple Choice Test

Introduction to Display Screen Equipment (DSE)

Health Risks Associated with DSE Use

• Musculoskeletal Disorders (MSDs)
• Eye Strain and Fatigue

DSE Regulations and Legal Responsibilities

Workstation Setup and Ergonomics

• Chair, Desk and Screen Positioning

Good Posture and Seating Techniques

Keyboard, Mouse and Equipment Positioning

Importance of Breaks and Work Routines

DSE Risk Assessments

Adjusting Workstations for Individual Needs

Preventing Discomfort and Injury

Environmental Factors (Lighting, Noise, Temperature)

Personal Responsibility and Best Practice

The Confined Space Awareness course is designed to provide learners with a clear understanding of the risks associated with working in or around confined spaces. It is suitable for individuals who may need to enter confined spaces, work nearby, or be involved in planning and supervising such activities.

This course covers the hazards commonly found in confined spaces, including lack of oxygen, toxic gases, restricted access and the risk of fire or explosion.  Learners will develop an understanding of how to identify confined spaces, assess risks and implement appropriate control measures.

Throughout the training, emphasis is placed on safe systems of work, including  permit-to-work procedures, the use of appropriate equipment and the importance of emergency planning. Learners will also gain an understanding of relevant health and safety legislation and their responsibilities when working in confined spaces.

On successful completion, learners will have the knowledge and awareness to recognise confined space hazards, follow safe procedures and contribute to a safer working environment.

Theory Multiple Choice Test

Introduction to Confined Spaces

Definition and Types of Confined Spaces

Health & Safety Legislation and Responsibilities

Hazards Associated with Confined Spaces

• Lack of Oxygen
• Toxic Gases and Vapours
• Fire and Explosion Risks

‍

Risk Assessment and Control Measures

Safe Systems ofWork and Permit-to-Work Procedures

Use of Personal Protective Equipment (PPE)

Gas Monitoring

Communication and Supervision Requirements

Emergency Procedures and Rescue Awareness

Roles and Responsibilities of Workers and Supervisors

Identifying Confined Spaces in the Workplace

The Construction Design and Management (CDM) training course is designed to provide learners with a clear understanding of their duties and responsibilities under the CDM Regulations 2015. It is suitable for those  involved in construction projects, including clients, designers, contractors and site managers.

This course explains how CDM regulations aim to improve health, safety and welfare  throughout all stages of a construction project—from initial design and  planning through to completion. Learners will develop an understanding of how to effectively plan, manage and coordinate work to reduce risks and ensure compliance.

Throughout the training, emphasis is placed on the roles and responsibilities of duty holders, including the client, principal designer and principal contractor. Learners will also explore the importance of risk management, communication and cooperation between all parties involved in a project.

On successful completion, learners will have the knowledge and confidence to apply CDM principles in practice, helping to create safer construction environments and ensure projects are delivered in line with legal requirements.

Theory Multiple Choice Test

Introduction to CDM Regulations 2015

Purpose and Scope of CDM

Key Duty Holders and Their Responsibilities

• Client
• Principal Designer
• Principal Contractor
• Designers and Contractors

Legal Requirements and Compliance

Planning and Managing Construction Projects Safely

Risk Management and Hazard Identification

Pre-Construction Information (PCI)

Construction Phase Plan (CPP)

Health and Safety File Requirements

Communication, Cooperation and Coordination

Managing High-Risk Activities

Worker Engagement and Consultation

Monitoring, Reviewing and Maintaining Standards

The Asbestos Awareness course is designed to provide learners with essential knowledge about the risks associated with asbestos and how to avoid disturbing it in the workplace. It is suitable for anyone who may encounter asbestos-containing materials as part of their work but does not intentionally work with asbestos.

This course covers the properties of asbestos, its historical use in construction, and the serious health risks associated with exposure, including diseases such as  asbestosis and mesothelioma. Learners will develop an understanding of where asbestos may be found and how to identify potential asbestos-containing  materials.

Throughout  the training, emphasis is placed on recognising risks, following safe systems of work and understanding what to do if asbestos is suspected or accidentally disturbed. Learners will also gain an understanding of relevant UK  legislation, including the Control of Asbestos Regulations.

On successful completion, learners will have the knowledge and awareness needed to avoid  the risks associated with asbestos and contribute to a safer working  environment.

Theory Assessment

Introduction to Asbestos and Its History of Use

Types of Asbestos and Their Properties

Health Risks Associated with Asbestos Exposure

Asbestos-Related Diseases (e.g. Asbestosis, Mesothelioma)

Where Asbestos Can Be Found in Buildings

Identifying Asbestos-Containing Materials (ACMs)

Health & Safety Legislation (Control of Asbestos Regulations)

Roles and Responsibilities of Employers and Employees

Risk Awareness and Avoiding Disturbance

Safe Systems of Work and Control Measures

What to Do if Asbestos is Suspected or Disturbed

Emergency Procedures and Reporting Requirements

The Abrasive Wheels Awareness course is designed to provide learners with the knowledge and understanding required to safely use and handle abrasive wheels in the workplace. It is suitable for anyone who uses, changes or works in close proximity to abrasive wheel equipment.

This course covers the hazards associated with abrasive wheels, including the risk of breakage, incorrect mounting and unsafe use. Learners will develop an understanding of how to select the correct wheel for the task, inspect equipment before use and ensure it is fitted correctly.

Throughout the training, emphasis is placed on safe working practices, proper storage and handling of wheels, and the importance of following manufacturer guidance and legal requirements. Learners will also gain an understanding of relevant health and safety legislation, including the Provision and Use of Work Equipment Regulations (PUWER).

On successful completion, learners will have the knowledge and confidence to use abrasive  wheels safely, helping to reduce the risk of accidents and maintain a safe working environment.

Theory assessment and practical wheel mounting activity.

Introduction to Abrasive Wheels and Their Uses

Health & Safety Legislation (including PUWER)

Types of Abrasive Wheels and Equipment

Hazards Associated with Abrasive Wheels

Wheel Markings and Selection of the Correct Wheel

Safe Storage and Handling of Abrasive Wheels

Pre-Use Inspections and Equipment Checks

Mounting and Dismounting of Abrasive Wheels

Safe Operating Procedures

Use of Guards and Safety Devices

Personal Protective Equipment (PPE) Requirements

Managing Risks (Dust, Noise, Vibration and Breakage)

Safe Working Practices in Different Environments

Identifying Defects and When to Remove Equipment from Use

Emergency Procedures and Incident Response

The Slips, Trips & Falls in Construction course is designed to raise awareness of the most common causes of injuries on construction sites. It provides learners with the knowledge and understanding needed to identify hazards and implement effective control measures in high-risk, dynamic environments.

This course focuses on the specific risks associated with construction activities, including uneven ground, trailing cables, poor housekeeping, changing site conditions and work at height. Learners will develop an understanding of how to assess risks, maintain safe access routes and ensure work areas are kept  clear and organised.

Throughout the training, emphasis is placed on hazard awareness, personal responsibility and the importance of following site procedures. Learners will also gain an understanding of relevant health and safety legislation and best practice  guidance within the construction industry.

On successful completion, learners will be better equipped to recognise potential hazards,  take preventative action and contribute to a safer, more controlled construction site.

Theory Assessment

Introduction  to Slips, Trips & Falls in Construction

Health & Safety Legislation and Responsibilities

Common Causes of Slips, Trips and Falls on Site

Identifying Hazards in Construction Environments

Risk Assessment and Control Measures

Importance of Good Housekeeping on Site

Managing Cables, Materials and Access Routes

Working on Uneven Ground and Changing Surfaces

Safe Use of Access Equipment and Walkways

Environmental Factors (Weather, Lighting, Mud, Ice)

Personal Responsibility and Safe Behaviour

Preventative Measures and Best Practice

Reporting Hazards and Unsafe Conditions

‍

 The Slips, Trips & Falls training course is designed to raise awareness of one of the most common causes of workplace injuries. It provides learners with the knowledge and understanding needed to identify hazards and take practical steps to prevent accidents in a wide range of working environments.

This course focuses on the key causes of slips, trips and falls, such as poor housekeeping, uneven surfaces, spillages and inappropriate footwear. Learners will develop an understanding of how to assess risks, implement control measures and maintain safe working areas.

Throughout the training, emphasis is placed on personal responsibility, hazard awareness and the importance of maintaining high safety standards. Learners will alsO gain an understanding of relevant health and safety legislation and the role both employers and employees play in reducing risks.

On successful completion, learners will be better equipped to recognise potential hazards,  take preventative action and contribute to a safer, more organised workplace.

Theory Assessment

Introduction to Slips, Trips & Falls and Their Impact

Health & Safety Legislation and Responsibilities

Common Causes of Slips, Trips and Falls

Identifying Hazards in the Workplace

Risk Assessment and Control Measures

Importance of Good Housekeeping

Safe Use of Walkways, Stairs and Access Routes

Managing Spillages and Contaminants

Footwear and Personal Responsibility

Lighting and Environmental Factors

Preventative Measures and Best Practice

Reporting Hazards and Unsafe Conditions

‍

The Vehicle Banksman Awareness course is designed to provide learners with the knowledge and skills required to safely guide and control the movement of vehicles in the workplace. It is suitable for individuals working in construction, logistics, warehousing and other environments where vehicles and pedestrians operate in close proximity.

This course focuses on the role and responsibilities of a banksman, including how to  reduce the risks associated with reversing vehicles and manoeuvring in confined or busy areas. Learners will develop an understanding of safe signalling techniques, maintaining clear communication with drivers, and positioning themselves safely at all times.

Throughout the training, emphasis is placed on hazard awareness, site safety procedures and the importance of planning vehicle movements to prevent accidents.  Learners will also gain an understanding of relevant health and safety legislation and best practice guidance.

On successful completion, learners will have the confidence and competence to carry out banksman duties effectively, helping to reduce the risk of collisions, protect pedestrians and maintain a safe working environment.

Practical & Theory Assessment

Introduction to the Role of a Vehicle Banksman

Health & Safety Legislation and Responsibilities

Common Hazards Associated with Vehicle Movements

Risks of Reversing Vehicles and Blind Spots

Duties and Responsibilities of a Banksman

Safe Positioning and Visibility

Standard Hand Signals and Communication Methods

Communication with Drivers and Other Site Personnel

Planning and Controlling Vehicle Movements

Traffic Management and Site Safety Procedures

Pedestrian Safety and Segregation

Hazard Identification and Risk Control Measures

Use of PPE and Site Safety Equipment

Emergency Procedures and Incident Response

‍

The Level 2 Safety Harness course is designed to provide learners with the knowledge and practical skills required to safely use, inspect and maintain safety harnesses when working at height.

It is suitable for individuals working in construction, maintenance, utilities and other industries where fall protection is essential.

This course focuses on the correct selection, fitting and use of harness systems, as well as understanding the risks associated with working at height.

Learners will develop an awareness of relevant health and safety legislation and the importance of following safe systems of work. Throughout the training, emphasis is placed on pre-use inspections, identifying defects,  and ensuring equipment is suitable for the task. Learners will also gain an understanding of anchor points, lanyards and fall arrest systems, as well as  how to minimise risks to themselves and others.

On successful  completion, learners will have the confidence and competence to use safety harness equipment correctly, helping to reduce the risk of falls and ensure safe working practices when working at height.

Practical & Theory Assessments

Introduction to Working at Height and Associated Risks

Health & Safety Legislation and Responsibilities

Types of Safety Harnesses and Equipment

Components of a Harness System (Harness, Lanyards, Connectors, Anchor Points)

Pre-Use Inspections and Equipment Checks

Correct Fitting and Adjustment of Harnesses

Safe Use of Fall Arrest and Restraint Systems

Understanding Anchor Points and Their Selection

Identifying Defects and When to Remove Equipment from Use

Safe Systems of Work and Risk Assessments

Hazard Awareness and Risk Control Measures

Emergency Procedures and Basic Rescue Awareness

Storage, Maintenance and Care of Equipment

The Fire Extinguisher Awareness course is designed to provide learners with the essential knowledge and confidence to safely and effectively use fire extinguishers in the workplace. It is suitable for employees across all  industries and forms an important part of workplace fire safety training.

This course covers the basics of fire safety, including how fires start, the different types of fire and the appropriate methods of control. Learners will gain an understanding of the various types of fire extinguishers, their uses and limitations, and how to select the correct extinguisher for different fire classes.

Throughout the training, emphasis is placed on safe use, ensuring learners understand when it is appropriate to tackle a fire and when to evacuate. The course also highlights the importance of fire prevention, recognising hazards and following emergency procedures.

On successful completion, learners will have the knowledge and confidence to respond  appropriately in the event of a fire, helping to protect themselves, others  and the workplace.

‍

Theory Assessment

Basic Principles of Fire Safety

The Fire Triangle and How Fires Start

Common Causes of Workplace Fires

Fire Prevention Measures

Types and Classes of Fire (A, B, C, D, Electrical, F)

Different Types of Fire Extinguishers and Their Uses

Colour Coding and Identification of Extinguishers

Selecting the Correct Extinguisher for Each Fire Type

Safe Use of Fire Extinguishers (PASS Technique)

When to Tackle a Fire and When to Evacuate

Emergency Procedures and Raising the Alarm

Roles and Responsibilities in Fire Safety

Hazard Identification and Risk Awareness

The Lone Worker Awareness course is designed to equip learners with the knowledge and skills needed to work safely and effectively when operating alone.

This course focuses on risk awareness, personal safety, and understanding legal responsibilities, helping both employees and employers meet their obligations under the Health and Safety at Work etc. Act 1974 and the Management of Health and Safety at Work Regulations 1999.

Throughout this short course, learners will develop an understanding of how to identify and manage risks, respond to emergencies, and follow safe working practices when working independently.

On completion, learners will have the confidence and knowledge to work safely alone while contributing to a compliant and secure working environment.

Theory Assessment

Understanding lone working risks and hazards

Emergency procedures and incident response

Risk assessment and hazard management

Legal duties and responsibilities

Practical steps to maintain personal safety

This regulated and nationally recognised qualification is designed to provide learners with a greater awareness of safe working practices when working at height, including the use of ladders, stepladders, harnesses, and other related equipment.

During this 3-hour course, learners will develop a solid understanding of the key principles associated with working at height. The training focuses on essential safety considerations, legal responsibilities, and best practices to minimise risk in the workplace.

On completion, learners will have the knowledge and awareness required to work more safely at height and contribute to a safer working environment.

‍

Theory Assessment

Legislation & Responsibilities

Hierarchy of Control measures

Safe Working Practices

Equipment Identification and Use

Hazard Identification and Risk Assessment

Reporting Procedures

‍

This regulated and nationally recognised qualification is designed to develop learners’ understanding of COSHH (Control of Substances Hazardous to Health) Regulations and their application in the workplace.

During this half-day course, learners will gain essential knowledge of the legal requirements surrounding hazardous substances, along with the precautions and control measures needed to reduce risks. The course also explores the importance of risk assessments and how they contribute to the safe handling, storage, and use of hazardous substances.

On completion, learners will have the confidence to identify hazards, implement appropriate control measures, and help ensure a safer working environment.

‍

Theory Assessment

COSHH Law and Regulations

Identifying Hazards

Health Hazards & Effects

Risk Assessment and Control

Safe Handling & Storage

Emergency Procedures

‍

During this 1-day qualification, learners will gain a basic introduction into the principles of risk assessment. Topics covered include: main causes of work-related fatalities, basic processes for undertaking a risk assessment, key terms associated with risk assessments, methods that can be used to prioritise risks and more.

Theory Assessment

Fundamental principles

Legal and ethical duties

The 5 steps of Risk Assessment

Risk evaluation

Identifying hazards

Record keeping

Manual handling is one of the most common causes of workplace injury. Adequate training is not only a legal requirement, it is incredibly important for the safety of all staff.

The law states that employers have a legal responsibility to provide adequate training for those who perform manual handling tasks in their day to day role.

During this 1-day course, learners will be taught the key principles of manual handling and how to apply these to their workplace. They will also practise a wide range of techniques, ensuring that they leave the course confident and proficient in moving and handling.

Practical & Theory Assessments

Understanding common injuries, anatomy of the spine, mechanics of movement (centre of gravity, lever system), and avoiding unsafe manoeuvres.

Understanding the regulations, employer responsibilities, and employee duties regarding manual handling.

How to identify, assess, and control risks associated with moving loads.

Practical Techniques

The Level 2 Award in Principles of Manual Handling is a nationally recognised qualification designed to provide learners with a strong understanding of safe manual handling practices in the workplace. It is suitable for employees across a wide range of industries where lifting,  carrying, pushing or pulling tasks are part of daily activities.

This course focuses on the risks associated with poor  manual handling and the potential for injury, including musculoskeletal disorders. Learners will develop an understanding of how to assess manual handling tasks, identify hazards and apply appropriate control measures to reduce the risk of injury.

Throughout the training, learners will explore safe handling techniques, the importance of correct posture, and how to use mechanical aids where appropriate. The course also covers relevant health and safety legislation and the responsibilities of both employers and employees  in maintaining a safe working environment.

On successful completion, learners will have the knowledge and confidence to carry out manual handling tasks safely and effectively,  helping to reduce workplace injuries and promote safer working practices.

‍

Theory Assessment

Introduction to Manual Handling and Associated Risks

Health & Safety Legislation and Responsibilities

Common Causes of Manual Handling Injuries

Musculoskeletal Disorders (MSDs) and Prevention

Risk Assessment Principles (TILE: Task, Individual, Load,Environment)

Safe Manual Handling Techniques

Correct Lifting, Carrying, Pushing and Pulling Methods

Use of Mechanical Aids and Equipment

Good Posture and Ergonomics

Reducing Risks in the Workplace

Employer and Employee Responsibilities

Reporting Hazards andUnsafe Practices

The NPORS Disc Cutter training course is designed to provide learners with the knowledge and practical skills required to safely operate disc cutting equipment in construction and site-based environments.

This course covers all aspects of disc cutter operation,  including pre-use checks, equipment components and safe cutting techniques. Learners will develop an understanding of how to carry out cutting tasks safely and efficiently across a range of materials, while maintaining control of the equipment at all times.Throughout the training, emphasis is placed on hazard awareness, including risks such as dust, noise, vibration and kickback, as  well as the correct use of personal protective equipment (PPE). Learners will also gain an understanding of relevant health and safety legislation and safe systems of work.

Upon successful completion of the course, learners will be  awarded the NPORS Disc Cutter Operator Card. This certification confirms that the holder has demonstrated the required knowledge and practical competence to safely  operate disc cutting equipment in line with industry standards.

The NPORS card is widely recognised across the  construction industry and serves as proof of operator competence on site.

Practical & Theory Assessments

Introduction to Disc Cutting Equipment

Health & Safety Legislation and Operator Responsibilities

Types of Disc Cutters and Applications

Machine Components and Controls

Pre-Use Inspections and Equipment Checks

Safe Starting, Stopping and Operating Procedures

Cutting Techniques for Different Materials

Managing Risks (Dust, Noise, Vibration and Kickback)

Safe Handling and Control of Equipment

Personal Protective Equipment (PPE) Requirements

Hazard Awareness and Risk Control Measures

Safe Working Practices in Various Site Environments

Refuelling and Basic Maintenance Awareness

Environmental Considerations on Site

Storage and Transportation of Equipment

‍

 The NPORS CAT & Genny training course is designed to provide learners with the knowledge and practical skills required to safely locate and avoid underground services in construction and site-based environments.

This course focuses on the correct use of Cable Avoidance Tools (CAT) and Signal Generators (Genny) to detect buried services such as electrical cables, gas pipes and water lines. Learners will develop an understanding of the risks associated with underground utilities and how to minimise the likelihood of strikes during excavation activities.

Throughout the training, emphasis is placed on safe systems of work, interpreting detection signals, and following correct scanning techniques. Learners will also gain an understanding of relevant health and safety legislation and best practice guidance for avoiding underground services.

Upon successful completion of the course, learners will be awarded the NPORS CAT & Genny Operator Card. This certification confirms that the holder has demonstrated the required knowledge and practical competence to safely use Cable Avoidance Tools (CAT) and Signal Generators (Genny) to locate underground services.

The NPORS card is widely recognised across the construction industry and serves as proof of competence when carrying out excavation and groundworks activities.

Practical & Theory Assessments

Introduction to Underground Services and Associated Risks

Health & Safety Legislation and Operator Responsibilities

Types of Underground Services (Electric, Gas, Water, Telecoms)

Principles of Cable Avoidance

CAT (Cable Avoidance Tool) Components and Functions

Genny (Signal Generator) Operation and Modes

Detection Techniques (Power, Radio and Genny Modes)

Safe Scanning Procedures and Site Surveys

Interpreting Signals and Avoiding Errors

Use of Plans and Utility Drawings

Safe Digging Practices and Permit-to-Dig Systems

Hazard Awareness and Risk Control Measures

Common Mistakes and How to Avoid Service Strikes

Environmental and Site Considerations

Equipment Checks and Basic Maintenance

The NPORS Forklift Truck training course is designed to provide learners with the knowledge and practical skills required to safely operate a forklift in a range of workplace environments.

This course covers all aspects of forklift operation, including pre-use inspections,  machine controls and safe handling techniques. Learners will develop an understanding of lifting and transporting loads, maintaining stability, and operating safely in busy working environments such as warehouses, yards and construction sites.

Throughout the training, emphasis is placed on hazard awareness, safe working practices and operator responsibilities. Learners will also gain an understanding of relevant health and safety legislation, as well as how to minimise risks when working around people, racking systems and other equipment.

Upon  successful completion of the course, learners will be awarded the NPORS Forklift Truck Operator Card.

This certification confirms that the holder has demonstrated the required  knowledge and practical competence to safely operate a forklift truck in line with industry standards. The NPORS card is widely recognised across the construction and industrial sectors and serves as proof of operator  competence in the workplace.

Endorsements may be applied depending on the type of forklift training completed, such as Counterbalance, Reach Truck, or other specialist categories.

Practical & Theory Assessments

Introduction to Forklift Trucks

Health & Safety Legislation and Operator Responsibilities

Types of Forklifts and Their Uses (e.g. Counterbalance, Reach)

Machine Components and Controls

Pre-Use Inspections and Daily Checks

Safe Starting, Stopping and Operating Procedures

Load Handling, Stacking and De-Stacking Techniques

Load Stability and Centre of Gravity Awareness

Manoeuvring in Confined Spaces

Working Safely Around Pedestrians and Other Vehicles

Hazard Awareness and Risk Control Measures

Refuelling /Battery Charging and Basic Maintenance

Workplace Safety (e.g. Warehouses, Yards, Construction Sites)

Environmental Considerations

Parking and Securing the Vehicle

The NPORS 360 Excavator training course is designed to provide learners with the knowledge and practical skills required to safely operate a 360-degree excavator in construction and site-based environments.

This course covers all aspects of excavator operation, including pre-use inspections, machine controls and safe operating techniques. Learners will develop an understanding of excavation procedures, lifting operations, and how to work efficiently across a range of site conditions.

Throughout the training, emphasis is placed on hazard awareness, safe working practices and operator responsibilities. Learners will also gain an understanding of relevant health and safety legislation, as well as how to minimise risks when working around services, structures and other personnel on site.

Upon successful completion of the course, learners will receive an NPORS 360 Operators Card. This certification confirms that the holder has demonstrated the required knowledge and practical competence to safely operate a 360-degree excavator in line with industry standards. The NPORS card is widely recognised across the construction industry.

Endorsements may be applied depending on the category of training completed, such as below 10 tonnes, above 10 tonnes, or additional modules including lifting operations.

Practical & Theory Assessments

Introduction to 360 Excavators

Health & Safety Legislation and Operator Responsibilities

Machine Components and Controls

Pre-UseInspections and Daily Checks

Safe Starting, Stopping and Operating Procedures

Excavation Techniques and Safe Digging Practices

Lifting Operations (where applicable)

Load Awareness and Machine Stability

Working Around Underground and Overhead Services

Operating on Slopes and Uneven Ground

Manoeuvring in Confined Spaces

Hazard Awareness and Risk Control Measures

Safe Working Practices Around Personnel and Structures

Refuelling and Basic Maintenance Awareness

Environmental Considerations on Site

Parking and Securing the Machine

The NPORS Telescopic Handler training course is designed to provide learners with the knowledge and practical skills required to safely operate a telehandler in construction and site-based environments.

This course covers all aspects of telehandler operation, including pre-use inspections,  machine controls and safe handling techniques. Learners will develop an understanding of lifting and placing loads, operating on uneven ground, and working safely in a variety of site conditions.

Throughout the training, emphasis is placed on hazard awareness, load stability, and safe working practices. Learners will also gain an understanding of relevant  health and safety legislation, as well as their responsibilities as plant operators when working around people, structures and other machinery.

Upon successful completion of the course, learners will be awarded the NPORS Telescopic Handler (Telehandler) Operator Card.

This  certification confirms that the holder has demonstrated the required knowledge and practical competence to operate a telehandler safely and in  line with industry standards.

The NPORS  card is widely recognised across the construction industry and serves as  proof of operator competence on site.

‍

Practical & Theory Assessments

Introduction to Telescopic Handlers

Health & Safety Legislation and Operator Responsibilities

Machine Components and Controls

Pre-Use Inspections and Daily Checks

Safe Starting, Stopping and Operating Procedures

Load Charts and Understanding Rated Capacities

Lifting, Placing and Transporting Loads

Load Stability and Centre of Gravity Awareness

Operating on Slopes and Uneven Ground

Manoeuvring in Confined Spaces

Working Safely Around People, Structures and Other Plant

Hazard Awareness and Risk Control Measures

Use of Attachments (where applicable)

Refuelling and Basic Maintenance Awareness

Environmental Considerations on Site

Parking and Securing the Machine

The NPORS Ride-On Roller training course is designed to provide learners with the  knowledge and practical skills required to safely operate ride-on rollers  within construction and site-based environments.

This course covers all aspects of ride-on roller operation, including pre-use inspections, machine controls and safe operating techniques. Learners will  develop an understanding of how to compact materials effectively, work safely  on varying ground conditions, and operate the machine in a controlled and  efficient manner.

Throughout  the training, emphasis is placed on hazard awareness, safe working practices  and operator responsibilities. Learners will also gain an understanding of  relevant health and safety legislation and how to minimise risks to  themselves and others on site.

Upon successful completion of the course, learners will be awarded the NPORS Ride-On Roller Operator Card.

This certification demonstrates that the holder has achieved the required knowledge and practical competence to safely operate a ride-on roller in line with industry standards. The NPORS card is widely recognised across the construction industry and can be used as proof of operator competence on  site.

Practical & Theory Assessments

Introduction to Ride-On Rollers

Health & Safety Legislation and Operator Responsibilities

Machine Components and Controls

Pre-Use Inspections and Daily Checks

Safe Starting, Stopping and Operating Procedures

Compaction Principles and Techniques

Manoeuvring on Site and Working Around Obstacles

Operating on Slopes and Uneven Ground  

Hazard Awareness and Risk Control Measures

Safe Working Practices Around Personnel

Refuelling and Basic Maintenance Awareness

Environmental Considerations on Site

Parking and Securing the Machine

The NPORS Forward Tipping Dumper training course is designed to provide learners with the knowledge and practical skills required to safely operate a forward tipping dumper in construction and site-based environments.

This course covers all aspects of dumper operation, from pre-use inspections and basic controls to safe manoeuvring, loading and transporting materials across varying ground conditions. Learners will develop an understanding of potential hazards associated with dumper use and how to minimise risks to themselves and others on site.

Throughout the training, emphasis is placed on safe working practices, awareness of surroundings and effective machine handling. Learners will also gain an understanding of relevant health and safety legislation, as well as their responsibilities as plant operators.

Upon successful completion of the course, learners will be awarded the NPORS Forward Tipping Dumper Operator Card.

This certification confirms that the holder has demonstrated the required knowledge and practical competence to operate a forward tipping dumper safely and in line with industry standards. The NPORS card is widely recognised across the construction industry and can be used as proof of operator competence on site.

Depending on experience

‍

Introduction to Forward Tipping Dumpers

Health & Safety Legislation and Operator Responsibilities

Machine Components and Controls

Pre-Use Inspections and Daily Checks

Safe Starting, Stopping and Operating Procedures

Manoeuvring the Dumper on Site

Loading, Transporting and Discharging Materials

Working on Slopes and Uneven Ground

Hazard Awareness and Risk Control Measures

Safe Working Practices Around People andObstacles

Refuelling and Basic Maintenance Awareness

Environmental Considerations on Site

Parking and Securing the Machine

This course revisits the core responsibilities of a site manager, focusing on maintaining high standards of health and safety, managing site operations effectively, and ensuring compliance with the latest legal requirements and best practice. Learners will refresh their knowledge of risk assessments, method statements and the implementation of safe systems of work.

Throughout the training, emphasis is placed on leadership, communication and decision-making, helping managers confidently oversee teams, coordinate contractors and respond to the challenges of busy construction environments. The course also highlights updates in legislation, hazard management and incident prevention to ensure learners remain current and effective in their role.

On successful completion, learners will have renewed confidence in their ability to manage construction sites safely, efficiently and in line with industry expectations.

Written paper

Refresher on Roles and Responsibilities of a Site Manager

Updates to Health & Safety Legislation and Industry Best Practice

Reviewing Risk Assessments and Method Statements (RAMS)

Implementing and Monitoring Safe Systems of Work

Hazard Identification, Risk Control and Accident Prevention

Leadership, Communication and Effective Decision-Making

Managing Contractors, Subcontractors and Workforce Performance

Monitoring Site Operations, Productivity and Quality Standards

Incident Reporting, Investigation and Corrective Actions

Site Documentation, Record Keeping and Auditing

Managing High-Risk Activities (e.g. Working at Height, Plant Operations)

Environmental Management and Site Responsibilities

Ensuring Compliance, Site Security and Welfare Standards

‍

The NPORS Construction Site Manager course is designed to provide learners with the advanced knowledge and skills required to effectively manage construction sites in a safe, compliant and efficient manner.

This course focuses on the responsibilities of a site manager, including overseeing daily operations, managing teams and subcontractors, and ensuring all work is carried out in line with current health and safety legislation and industry best practice. Learners will developa strong understanding of planning, organising and monitoring site activities to maintain high standards of safety, quality and productivity.

Throughout the training, learners will explore key areas such as risk management, implementing and reviewing safe systems of work, and ensuring compliance with legal requirements. The course also places emphasis on leadership, communication and decision-making, enabling site managers to effectively coordinate teams and respond to the challenges of complex construction projects.

On successful completion, learners will have the confidence and competence to manage construction sites professionally, ensuring safe working environments, efficient operations and successful project delivery.

Written paper

‍

Roles and Responsibilities of a Construction Site Manager

Health & Safety Legislation and Compliance

Planning, Organising and Managing Site Operations

Risk Assessments and Method Statements (RAMS)

Developing and Implementing Safe Systems of Work

Hazard Identification, Risk Control and Accident Prevention

Managing Contractors, Subcontractors and Workforce

Leadership, Communication and Decision-Making Skills

Monitoring Performance, Productivity and Quality Standards

Incident Reporting, Investigation and Corrective Actions

Site Documentation, Record Keeping and Auditing

Managing High-Risk Activities (e.g. Working at Height, Plant Operations)

Environmental Management and Sustainability on Site

Ensuring Site Security, Welfare and Compliance

This course reinforces key health and safety principles, ensuring learners remain up to date with current legislation, industry best practice and site procedures. It revisits the core responsibilities of a site supervisor, including managing risks, implementing safe systems of work, and maintaining high standards of safety and compliance on site.

Throughout the training, learners will refresh their understanding of hazard identification, risk assessments and method statements (RAMS), as well as effective communication and leadership techniques. The course also highlights the importance of monitoring site activities, managing teams and responding appropriately to incidents or unsafe behaviour.

On successful completion, learners will have renewed confidence in their ability to carry out supervisory duties safely, effectively and in line with current industry expectations.

Written paper

‍

Refresher on Roles and Responsibilities of a Site Supervisor

Updates to Health & Safety Legislation and Industry Best Practice

Reviewing Risk Assessments and Method Statements (RAMS)

Safe Systems of Work and Risk Control Measures

Hazard Identification and Accident Prevention

Communication, Leadership and Team Management

Monitoring Site Activities and Maintaining Standards

Incident Reporting and Investigation Procedures

Site Safety Procedures and Compliance

Managing Contractors and Workforce Behaviour

PPE Requirements and Site Safety Controls

High-Risk Activities (e.g. Working at Height)

Environmental Awareness and Responsibilities

Maintaining Accurate Site Records and Documentation

The NPORS Construction Site Supervisor course is designed to provide learners with the knowledge and skills required to effectively supervise construction site activities in a safe and compliant manner.

This course develops a strong understanding of the responsibilities associated with supervising a workforce, including maintaining health and safety standards, coordinating site operations and ensuring work is carried out in line with relevant legislation and best practice. Learners will gain insight into risk assessments, method statements, and how to implement safe systems of work.

Throughout the training, emphasis is placed on communication, leadership and the importance of monitoring performance on site. Learners will also explore how to identify hazards, manage risks and take appropriate action to prevent incidents, helping to create a safer working environment for everyone on site.

On successful completion, learners will have the confidence and competence to carry out supervisory duties effectively, ensuring high standards of safety, organisation and productivity are maintained across construction projects.

Written paper

Roles and Responsibilities of a Site Supervisor

Health & Safety Legislation and Compliance

Risk Assessments and Method Statements (RAMS)

Implementing Safe Systems of Work

Hazard Identification and Risk Control Measures

Communication and Leadership Skills

Monitoring Site Activities and Workforce Behaviour

Accident Prevention and Incident Reporting

Managing Contractors and Subcontractors

Site Inductions and Toolbox Talks

Personal Protective Equipment (PPE)Requirements

Working at Height and High-Risk Activities

Environmental Awareness and Site Impact

Maintaining Site Records and Documentation

The NPORS Site Safety Awareness course is designed to provide learners with a fundamental understanding of health and safety practices within construction and site-based environments. It is ideal for those new to the industry, as well as individuals who require a refresher on safe working procedures.

Throughout the course, learners will gain awareness of common site hazards and the measures required to control risks effectively. Key topics include safe working practices, personal responsibilities, the importance of risk  assessments and method statements, and how to follow site rules and  procedures correctly.

The training also covers essential areas such as working at height, manual handling, use of personal protective equipment (PPE), and how to identify and report unsafe  conditions. Learners will develop an understanding of how their actions can  impact not only their own safety, but also the safety of others on site.

On successful completion, learners will have a solid foundation in site safety awareness, helping them to work more confidently, responsibly and in line with industry expectations.

Practical & Theory Assessments

Health & Safety Legislation and  Responsibilities

Roles and Responsibilities on Site

Common Hazards in Construction Environments  

Risk Assessments and Method Statements  (RAMS)

Safe Systems of Work

Personal Protective Equipment (PPE)

Working at Height Awareness

Manual Handling Awareness

Slips, Trips and Falls Prevention

Fire Safety Awareness

Hazard Identification and Reporting  Procedures

Site Rules, Signage and Welfare Facilities

Environmental Awareness on Site

‍

The Level 2 Safeguarding course is designed to provide learners with a clear understanding of how to recognise, respond to and report safeguarding concerns in a variety of settings.

Throughout the course, learners will develop an understanding of different types of abuse, including physical, emotional, sexual and neglect, as well as the signs and indicators that may suggest someone is at risk. The training also covers the importance of early intervention, appropriate reporting procedures and maintaining accurate records.

Learners will gain insight into relevant UK legislation and guidance, including safeguarding responsibilities under frameworks such as the Children Act and Working Together to Safeguard Children guidance.

The course also highlights the importance of maintaining professional boundaries and understanding the role each individual plays in safeguarding.

By completing this qualification, learners will feel more confident in identifying concerns, taking appropriate action and contributing to a safer environment for those in their care.

Theory Assessment

Safeguarding legislation and guidance

Indicators of abuse or neglect

Making judgments

Dealing with complaints and allegations

Effective communication

Safeguarding roles and responsibilities

Sharing of information

Supporting those experiencing poor mental health has become a key priority for individuals and organisations alike. As awareness of mental health continues to grow, so does the need for trained Mental Health First Aiders who can  provide support, guidance, and reassurance to those in need.

This nationally recognised 2-day course is designed to develop a deeper understanding of common mental health issues and equip learners with the skills and confidence to respond appropriately. Mental Health First Aiders play a vital role in promoting positive wellbeing and helping to reduce the stigma surrounding mental health in the UK.

Throughout the course, learners will gain the knowledge and practical tools needed to  support others effectively within the workplace and wider community.

On completion, learners will be able to confidently promote positive mental health and provide appropriate support to colleagues and others in need.

Theory Assessment

Defining mental health and well-being, the mental health continuum, and factors affecting mental health.

Duties and responsibilities of a mental health first aider, including maintaining personal wellbeing.

Identifying signs and symptoms of anxiety, depression, PTSD, self-harm, eating disorders, and suicide risk.

Techniques for approaching, assessing, and supporting employees, including active listening and non-judgmental communication.

Identifying workplace stress indicators, implementing mental health policies, and supporting returns to work.

Providing immediate assistance for mental health crises.

Directing individuals toward professional help and internal resources.

Did you know that 1 in 4 people in the UK are likely to experience mental health issues each year? Mental health is just as important as physical health, yet whilst we know how to take care of physical health, many people  do not know how to support friends, relatives or even colleagues who are experiencing poor mental health.

Throughout  this 1-day course, learners will develop an understanding of the importance of positive mental health and wellbeing in the workplace and the role that everyone plays in recognising mental health issues at work.

Topics  covered include: understanding mental health and its importance, promoting  positive mental health in the workplace, common mental health conditions,  mental health first aid at work action plans.

Theory Assessment

Understanding Mental Health

Awareness of Disorders

Recovery and the Action Plan

‍

Promoting good mental health inside and outside of the workplace is essential,  particularly as we understand more about how poor mental health can  negatively affect our relationships and resilience to overcome challenges.

Throughout this half-day course, learners will be introduced to mental health issues such as depression and suicide and build an understanding of stress.

Topics  covered include: An introduction to the use of appropriate language when supporting others and the importance of self-care as a tool to potentially improve mental health. 

Theory Assessment

Introduction to mental health and common mental health issues.

Awareness of stress and depression.

Introduction to identifying risks.

Understanding the use of appropriate language when talking about mental health to support others.

Techniques for improving personal mental health and well-being.

‍

The Level 2 Award in Fire Safety qualification has been designed for anyone who has a specific responsibility for fire safety in the workplace, such as designated fire wardens/fire marshals.

During this 1-day course, learners will develop their knowledge and skills in fire safety, including: how fires are caused, the risks associated with fire, principles of fire safety management at work, understanding the role of a fire warden and more.

Theory Assessment

The cause of fire in the workplace

The costs of fire

Hazards during and after a fire

Identifying and controlling a fire

Fire legislation

Fire safety inspections

Fire risk assessment

Roles of the fire warden

‍

This regulated and nationally recognised qualification provides learners with the opportunity to develop their fire safety awareness to help ensure that they are keeping themselves and others safe at all times in the workplace.

Over a half day period, learners will cover basic fire safety principles, including: causes of fires in the workplace, basic fire safety duties and responsibilities, principles of fire risk control, safe use of portable fire-fighting equipment and more.

Theory Assessment

The cause of fire in the workplace

The costs of fire

Basic fire safety duties

Actions to be taken in the event of a fire

Fire triangle

Safe use of portable firefighting equipment

Fire safety equipment checks

This regulated and nationally recognised qualification provides learners with the knowledge and practical skills required to deliver Basic Life Support (BLS), safely use an Automated External Defibrillator (AED), and effectively manage anaphylaxis.

The qualification and its learning outcomes are based on current recommendations from:

‍
• The Resuscitation Council (UK)
• A distinguished panel of experts in emergency medical care

‍

Designed to build confidence and competence, this course enables learners to respond quickly and effectively in life-threatening situations.

Upon completion, learners will have the practical competencies required to provide immediate and effective emergency care in both clinical and workplace settings.

Theory multiple choice test and Practical Assessments.

Incident and casualty assessment

Adult CPR and safe use of an AED

Managing an unconscious casualty

Recognition and treatment of anaphylaxis

Management of choking

Over 1 extended day, learners will develop the knowledge and practical competencies needed to provide effective first aid for adults, children and infants. Topics include: CPR and AED use, choking, wounds and bleeding, unconscious casualty and more.

Practical Assessments & Theory Assessment

‍

Understanding the role of a first aider, infection control, and consent.

Safely assessing scenes, recognizing illness, and prioritising treatment. 

CPR (adults, infants, children) and safe use of an Automated External Defibrillator (AED).

Placing adults, infants, and children in the recovery position.

Treating choking in adults, infants, and children.

Wounds, bleeding, and shock.

Minor injuries (cuts, grazes, grazes, splinters, nosebleeds).

Burns and scalds.

Seizures.

This regulated and nationally recognised qualification provides learners with the life-saving techniques needed to support an adult or child in an emergency situation, until professional medical help arrives.

During this half day course, learners will be given the opportunity to practice essential basic life support procedures, including: assessing an incident, managing an unresponsive casualty, recovery position, CPR and choking.

Theory multiple choice test and practical assessments

‍

Chain of Survival

Assessing the Scene

Managing an Unresponsive Casualty and the Recovery Position

CPR

Use of AED

‍

This regulated and nationally recognised qualification provides learners with the opportunity to develop the basic skills and knowledge needed to deal with a range of emergency paediatric first aid situations which could arise when looking after children.

During this 1-day course, learners will develop the skills and knowledge needed to deal with a range of paediatric first aid situations, including: managing an unresponsive infant or child, CPR, choking, seizures, external bleeding and more.

Practical Assessments & Theory Assessment

The roles of the paediatric first aider

Assessing an emergency situation

Dealing with an unconscious infant

Recovery position, CPR and defib

Choking

Minor injuries

Bites and stings

Seizures

Bleeding and shock

First aiders are an integral part of workplace safety. The Health and Safety (First Aid) Regulations 1981 require all employers to make arrangements to ensure their employees receive immediate attention if they are injured or taken ill at work. This includes appointing a suitable amount of first aiders and providing appropriate first aid training.

During this 1-day course, learners will develop the skills and knowledge needed to deal with a range of emergency first aid situations, including: managing an unresponsive casualty, CPR, choking, shock, wounds and bleeding and minor injuries.

Practical Assessments & Theory Assessment

The Role of the First Aider

Primary Survey

Secondary Survey

CPR and use of Defib

Choking

Treatment of Wounds and Bleeding

Treatment of Minor Injuries

Treatment of burns

Recognition and Treatment of Seizures

‍

Over a 2-day period, learners will develop the skills and knowledge needed to deal with a range of paediatric first aid situations, including: assessing an emergency situation, dealing with an unresponsive infant or child, CPR, choking, meningitis, head and spinal injuries, anaphylaxis, asthma and more.

Practical & Theory Assessments

Understanding the role of a pediatric first aider.

Assessing incident scenes and casualties.

CPR and AED (Automated External Defibrillator) for infants and children.

Choking treatment and managing unresponsive patients.

Anaphylaxis, asthma, meningitis, seizures/febrile convulsions, and diabetic emergencies.

Head, neck, back, eye, ear, and nose injuries.

Severe bleeding, burns, scalds, and shock.

Poisoning, electric shock, and extreme temperatures.

‍

This course is designed for qualified First Aiders who needto requalify within three years to maintain the validity of their certification. It ensures participants remain compliant while refreshing and updating their knowledge.

Throughout the course, learners will revisit essential first aid skills, stay informed on the latest techniques, and gain confidence in applying current best practices when responding to emergencies.This helps ensure that First Aiders continue to deliver effective, safe, andup-to-datirste care in the workplace.

Practical Assessments & Theory Assessment

The roles and responsibilities of a workplace first aider

Assessing incidents and primary/secondary surveys

CPR (including use of AED defibrillator) for adults

Recovery position and unresponsive casualty care

Management of choking, bleeding, and shock

Treatment of burns, fractures, and dislocation

Medical emergencies (e.g., stroke, epilepsy, diabetes, asthma)

Minor and major injury management

Recording/reporting incidents (aligned with RIDDOR)

Infection control, workplace health risks, and legal duties

‍

HSE guidelines state that employers should ensure their first aiders remain competent to perform their role. As such, it is strongly recommended that first aiders undertake annual refresher training to practise their skills and update their knowledge on the latest first aid procedures.

Over a half day period, learners will leave with a renewed confidence having had the opportunity to practise essential first aid procedures, including: managing an unresponsive casualty, recovery position, CPR, choking and more.

Practical Assessments

CPR & Safe use of an AED

Unconscious casualty

Choking casualty

Catastrophic bleeding

‍

First aid is an integral part of workplace safety. The Health and Safety (First Aid)  Regulations 1981 require all employers to make arrangements to ensure their  employees receive immediate attention if they are injured or taken ill at  work. This includes appointing a suitable amount of first aiders and providing appropriate first aid training.

Over a 3 day period, learners will develop the skills and knowledge needed to deal with a  range of first aid situations, including: assessing an incident, managing an  unresponsive casualty, CPR, heart attacks, choking, head and spinal injuries,  fractures, anaphylaxis and more.

This is a regulated and nationally recognised qualification, specifically designed for those who are appointed to act as a first aider in their workplace. It is also ideal for people who have a specific responsibility to provide first aid in voluntary and community activities.

Practical & Theory Assessments

The Role of the First Aider

Primary Survey & Secondary Survey

CPR and use of Defib

Choking

Treatmentof Wounds and Bleeding, Minor Injuries & Burns

Treatment of Anaphylaxis

Treatment of Major Illness

Treatment of Fractures, Sprains and Strains

Treatment of Head, Chest and Spinal Injury